GBT-212 Glass break simulator

The GBT-212 is for testing acoustic glass-break detectors. It detects the air pressure changes caused by the flexing or bending of glass and then automatically generates sound imitating the breaking of the glass.

BL-MCB Programmerare

Programmeraren BL-MCB är avsedd för att programmera MCB-02-modulens CAN BUSS med användning av programmet MCBLink 1.1. Den gäller i första hand att hitta den aktuella versionen av MCB-02 modulens ”CAN-paket” och uppgradera det till en nyare version. Programmeraren ansluts till en PC via en USB-ingång.

MCB-03 Innovated CAN bus converter

This product replaces the older MCB-02 module. It supports reading data from CAN buses, newly also FD CAN and LIN bus. The module converts digital information to analogue form, in order to connect to the inputs of the CA-2103, CA-345 and other car alarms. It switches information on vehicle locked/unlocked status, ignition status, door open and close, hood open and close, etc.

MCO-04 Car alarms output module

The product is an extension module for CA-2103 and CA-345 series car alarms for controlling appliances in the vehicle - independent heating, power supply for additional detectors, control of optical signalling and other functions.

PLV-JA85PG Alternative housing

Alternative grey housing for JA-85P and JA-85B detectors.

AN-08-1.5 Self adhesive GSM antenna

Self adhesive antenna for CA-2103 (CA-180x, CU-08), GSM 900 / 1800MHz, 1.5 m cable

AN-13GPS Magnetic GPS antenna

Magnetic GPS antenna, SMA connector. Can be used with CA-2103 Athos (CA-1803, CU-08).

SAM-252.21 Label ALARM 38 x 23 mm

Warning sticker - ALARM