Jablotron

EI208DW Stand-alone carbon monoxide detector with display

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

Stand-alone carbon monoxide detector with display

EI208DW Stand-alone carbon monoxide detector with display

The detector is certificated for use in building interiors, caravans and boats.

The detector indicates excessive carbon monoxide concentration both optically with a LED (Ei208DW also shows the concentration data on the display) and acoustically using a built-in siren.

The detector is powered with an integrated lithium battery which supplies the detector for its whole service life.

Technical specifications

Usable life 7 years (the end of life date is stated on the label)
Power Integrated non-replaceable lithium battery
Typical battery lifetime for the whole usable life of the detector
Operating temperature range -10 ºC to +40 ºC
Humidity range 15 % to 95 % (non-condensing)
Dimensions, weight 120 x 105 x 40 mm, 170 g
Conformity EN 50291-1; EN 50291-2, EN 50270

Related products

EI208W Stand-alone carbon monoxide detector

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

JA-110F Bus flood detector

The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.

JA-110G-CO Bus module for connection of an Ei208W(D) CO detector

This is a plug-in module designed for direct installation in a stand-alone Ei208W or Ei208DW CO detector, which enables its bus connection to the JABLOTRON 100 system.

JA-110ST Bus combined smoke and temperature detector

The JA-110ST bus fire detector (optical and temperature detection) detects fire in residential and commercial buildings . Allows you to set detection: optical and thermal, optical or thermal, optical only or temperature only.

JA-110TP Bus indoor thermostat

In a building, up to 4 thermostats can be installed that can control up to 4 independent circuits. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.

JA-111ST Bus combined smoke and heat detector

It is used to detect fire hazards in the interior of residential or commercial buildings. The product is not designed to be installed in industrial premises. The detector is powered via the control panel bus (EN 54-7; EN 54-5).

JA-111ST-A Bus combined smoke and heat detector

Used to detect a fire risk in the interior of residential or commercial buildings. It comprises of a siren that indicates a fire alarm, both from the entire detector and from another fire detector in the system.

JA-111TH Bus temperature detector

It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.