Jablotron

GS-208-CO Wired module for connection of the Ei208W(D) CO detector

This is a plug-in module designed for direct integration in the Ei208W or Ei208DW stand-alone CO detector that will enable its wired connection to a security or another system.

Wired module for connection of the Ei208W(D) CO detector

GS-208-CO Wired module for connection of the Ei208W(D) CO detector

The module provides galvanic isolation of the wired output from the entire detector. It provides the system with information about alarms and detector errors.

Specifications

Power supply 9 - 15 V DC
Current consumption (idle/maximum) 5 mA/5 mA
Dimensions 48 x 19 x 14 mm
Environment II. indoor, general (acc. to EN 50131-1)
Operating temperature range -10 °C to +40 °C
In conformity with EN 50130-4, EN 55022, EN 50581

Related products

EI208DW Stand-alone carbon monoxide detector with display

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

EI208W Stand-alone carbon monoxide detector

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

GS-133 Gas Detector - 12 V DC

The GS-133 detector is used to indicate leaking of explosive gases (natural gas, methan, propane, butane). The detector detects two levels of gas concen-tration - different output reactions.

GS-133-24 Gas Detector

The GS-133-24 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL etc). The detector detects two levels of gas concentration. (24V DC)

LD-12 The LD-12 flood detector

The detector is a water flood indicator for rooms (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission.The LD-12 detector can be connected to the input terminals of alarm systems.

LD-81 The LD-81 flood detector

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector.

SD-283ST Wired combined smoke and heat detector with built in siren

Detector is used to detect fire hazards in the interior of residential or commercial buildings. The detector is also suitable for installing in caravan trailers or mobile homes. The product is not designed to be installed in industrial premises.

SD-503ST Stand-alone combined smoke and heat detector

The SD-503ST is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises.