Jablotron

EI208W Stand-alone carbon monoxide detector

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

Stand-alone carbon monoxide detector

EI208W Stand-alone carbon monoxide detector

The detector is certificated for use in building interiors, caravans and boats.

The detector indicates excessive carbon monoxide concentration both optically with a LED (Ei208DW also shows the concentration data on the display) and acoustically using a built-in siren.

The detector is powered with an integrated lithium battery which supplies the detector for its whole service life.

Technical specifications

Usable life 7 years (the end of life date is stated on the label)
Power Integrated non-replaceable lithium battery
Typical battery lifetime for the whole usable life of the detector
Operating temperature range -10 ºC to +40 ºC
Humidity range 15 % to 95 % (non-condensing)
Dimensions, weight 120 x 105 x 40 mm, 170 g
Conformity EN 50291-1; EN 50291-2, EN 50270

Related products

LD-81 The LD-81 flood detector

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector.

JA-110ST Bus combined smoke and temperature detector

The JA-110ST bus fire detector (optical and temperature detection) detects fire in residential and commercial buildings . Allows you to set detection: optical and thermal, optical or thermal, optical only or temperature only.

JA-150ST Wireless fire and temperature detector

The JA-150ST optical wireless smoke and temperature detector detects fire inside residential or commercial premises. It allows these settings: smoke and heat, smoke or heat, smoke only, heat only.

JA-110F Bus flood detector

The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.

JA-110TP Bus indoor thermostat

In a building, up to 4 thermostats can be installed that can control up to 4 independent circuits. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.

JA-150TP Wireless indoor thermostat

Designed to measure and control the indoor temperature. The thermostat expands the application range of the JABLOTRON 100 system in the domain of home automation with simple zone control.

JA-111TH Bus temperature detector

It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.

JA-151TH Wireless temperature detector

It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.