AN-868-2PIN External antenna
The special design of the PIFA type provides the antenna with not only very good transmitting properties on different bases, but also tamper detection in the case of interruption or short-circuiting of the power supply (this functionality must be supported by the connected device). The antenna is suitable for both indoor and outdoor environments.
The AN-868-2PIN version is connected using a 2-pin connector that is used in devices of older systems and the present components of the JABLOTRON 100+ system.
|Communication band||868 MHz|
|Antenna gain||max. 3 dBi|
|Connection cable length||1.9 m|
|Dimensions (H x W x D)||130 x 50 x 30 mm|
|When a JABLOTRON alarm system is used:|
|Classification||security grade 2/Invornmental class IV
Note: valid only for AN-868 in combination with device, which detect a sabotage of external antenne.
|- according to||EN 50131-1, EN 50131-5-3|
|- operational temperature range||-20 °C až +60 °C|
|- maximal operational humidity||90% RH, non condensing|
The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100+ system (PG 1 to PG 32).
The JA-159P is an outdoor intruder wireless detector designed to detect human body movement in a protected area.
The JA-158P is an outdoor intruder wireless detector designed to detect human body movement in a protected area.
The JA-151IR four-beam infra-red optical barrier is designed for the indication of a breach into a protected area.
The JA-157P wireless outdoor detector with curtain lens characteristics is designed to indicate disturbances outside the building caused by human bodies.