JA-159P Wireless outdoor PIR detector
It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the detector to be used within the JABLOTRON 100+ system. The optical part of the detector has 2 PIR sensors and high immunity to false alarms and the detection of small animals.
The detector includes an Anti-masking function – protection against covering the view and it also has two tampers (front and back) built in. They immediately report opening the detector or attempting tampering. The detector does a self-test periodically and sends its status to the control panel. The detector should be installed by a trained technician with a valid certificate issued by an authorised distributor.
|Power||2x Lithium battery type CR123A (3.0 V/1.4 Ah)
Please note: Batteries are not included
|Current consumption (nominal/maximal)||35.5 µA/55 mA|
|Average battery lifetime||2 x CR123A, approx. 3 years|
|Communication band||868.1 MHz|
|RF range – communication range||up to 300 m (open area)|
|Optex detector parameter|
|Detection characteristics||12 m/90 °; 16 segments|
|Recommended installation height||0.8 – 1.2 m|
|Object motion speed||0.3 – 1.5 ms-1|
|Battery saving timer||adjustable 5 s or 120 s|
|Operational environment according to EN 50131-1||IV|
|Security grade||according to Optex|
|Operating temperature range||-20 °C to +60 °C|
|Detector cover conformance||IP55|
|Max. relative humidity of the environment||95 %|
|Dimensions||186 x 71.3 x 105.5 mm|
|Complies with||ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1|
|Can be operated according to||ERC REC 70-03|
The JA-158P is an outdoor intruder wireless detector designed to detect human body movement in a protected area.
The detector is designed to detect the movement of people in the outdoor environment. The optical part of the detector contains two PIR sensors with AND logic. An alarm signal will only occur if both detection zones are crossed simultaneously.