Jablotron

JA-150IR Wireless optical barrier

Detector is designed for the indication of a breach into a protected area by crossing the IR line.

Wireless optical barrier

JA-150IR Wireless optical barrier

The JA-150IR optical barrier is designed for the indication of a breach into a protected area by crossing the IR line between the transmitter and the receiver. The barrier is a product by Optex supplemented with transmitters compatible with the JABLOTRON 100 system, this being both in the transmitting and receiving part of the barrier. The device is equipped with a 2-ray optical part with a high immunity against false alarms and the detection of small animals. The barrier occupies two positions in the system. Both parts of the barrier can send a tamper signal to the control panel. The transmitters regularly perform automatic tests and report their status to the system. The barrier should be installed by a trained technician with a valid certificate issued by an authorised distributor.

Battery is not included.

Technical specifications

Power 4 x LSH20 type lithium batteries (3.6 V / 13 Ah)
Average battery lifetime app. 3 years (with 120 s energy saving mode)
Communication band 868.1 MHz, JA-100 protocol
RF range up to 300 m (open area)
Optex barrier parameters
Distance (max.) between the barrier units max. 60 m
Barrier installation height 0.7 – 1.0 m
Object motion speed as set by an installer
Detector cover conformance IP55
Max. relative humidity of the environment 95 %
Weight 1620 g
Operational environment according to EN 50131-1 IV
Operational temperature range -20 °C to +60 °C
Security grade according to OPTEX
Complies with ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1, EN 50581

Related products

JA-110P Bus PIR motion detector

The JA-110P is a bus PIR motion detector designed to protect interiors by infrared motion detection in the room . The characteristics of detection can be optimized by using interchangeable lenses.

JA-111P-WG Bus PIR motion detector

It is designed to detect human body motion inside buildings.

JA-111P-WW Bus PIR motion detector

It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90° / 12 m.

JA-120PB Bus combined PIR motion and glass-break detector

It serves for the detection of human movement in building interiors and for the detection of breaking glass windows. This detector combines two sensors (PIR motion & acoustic glass break) in one housing.

JA-120PC Bus PIR Motion Detector with Camera

The JA-120PC is a bus-powered PIR movement detector with a colour camera which takes colour images of up to 640 x 480 pixels definition.

JA-120PC (90) Bus PIR motion detector with 90° photo-verification camera

Used for motion detection inside buildings, including visual alarm confirmation. Taking a photo is activated by motion, so the cause of the alarm is always indicated in the image. Guaranteed detection coverage 90°/12 m.

JA-120PW Bus PIR / MW motion detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection certainty.

JA-150P Wireless motion PIR detector

The JA-150P is a PIR motion detector designed for interior protection. It detects object movement having a human body temperature. The detection characteristic may be optimised by using the alternative lenses.