Jablotron
GBT-212 Glass Break Simulator

The GBT-212 is for testing acoustic glass-break detectors. It detects the air pressure changes caused by the flexing or bending of glass and then automatically generates sound imitating the breaking of the glass.

BP12-18 Universal back-up power supply

BP12-18 serves for power powering of device which need 12V DC. The PLV-CP-L box is recommended for back-up batteries with capacities of 7 Ah - 18 Ah (a capacity of up to 26 Ah can be used with an external box).

DE06-12 Power supply 12 V/0.5 A

This switch-mode power supply is designed for powering a wireless keypad, and also for powering other 12V DC devices like GSM communicators or UC receivers made by Jablotron.

LT-089.07 adaptor with EU changeable plug

The power supply can be used where a 12 V power supply is required and there is no backup power supply from the bus.

AN-868 External antenna

The AN-868 external antennas are designed to extend the communication range of wireless devices of the Jablotron security system using a frequency of 868 MHz.

AN-868-2PIN External antenna

The AN-868 external antennas are designed to extend the communication range of wireless devices of the Jablotron security system using a frequency of 868 MHz.

SD-TESTER Test Spray Smoke Sabre

Smoke Sabre Test Spray is designed to test the functionality of Jablotron’s optical smoke detectors. Contains 150 ml of testing aerosol

SOLO C3 Test spray for CO detectors

Designed for testing the functionality of EI208W and EI208DW CO detectors. Supplied in a kit with application sleeves that prevent undesired dispersion of the test aerosol outside the detector space.