MCB-03 Innovated CAN bus converter

This product replaces the older MCB-02 module. It supports reading data from CAN buses, newly also FD CAN and LIN bus. The module converts digital information to analogue form, in order to connect to the inputs of the CA-2103, CA-345 and other car alarms. It switches information on vehicle locked/unlocked status, ignition status, door open and close, hood open and close, etc.

Innovated CAN bus converter

Technical specifications

Supply voltage 12/24 V (1032 V) DC
Current consumption 8 mA
Operational temperature range -40 °C to +85 °C
Dimensions without wiring 17 x 47 x 66 mm
Weight 34 g
Maximum switched current 200 mA
Comply with ECE Regulation No: 010.06

Related products

CA-2103 GSM/GPS car alarm

GSM/GPS car alarm with support for installation in vehicles with a CAN bus. Besides protection of car entries such as the doors, boot and hood you can extend the installation with up to 24 wireless detectors of the JA-100 and JA-18x series.

CA-2103SET P Car alarm set CA-2103, CA-550, JA-185P and PLV-JA85PG

Set of GSM/GPS car alarm with CAN bus reading support and detectors for complete car security. 

CA-2103SET B Car alarm set CA-2103, CA-550, JA-185B and PLV-JA85PG

Set of GSM/GPS car alarm with CAN bus reading support and detectors for complete car security.

CA-2103SET VAN Car alarm set CA-2103, CA-550, 2x JA-185P and JA-150M

Car alarm set CA-2103, CA-550, 2x JA-185P and JA-150M

CA-345 Car alarm with local signaling and immobilizer

The CA-345 car alarm is designed for installation in a car interior with a vehicle voltage of 12 as well as 24 V and a grounded negative pole. It is protected from polarity reversal, the activation inputs are protected from short-circuiting and voltage supply.