|power supply||12/24 V DC (8 – 32 V)|
|midle current consumption||max. 20 mA|
|peak consumption (during communication)||1 A|
|working range of the GSM module||E-GSM/GPRS 850 / 900 / 1800 / 1900MHz|
|max. output power of the transmitter||2 W for GSM 850/900
1 W for GSM 1800/1900
|remote control receiver frequency||868.1 MHz, GFSK, e.r.p. <25 mW|
|operating temperature range||-20 °C to +85 °C|
|SIR output switching the supply voltage, max. load||1.3 A|
|immobilization circuit||8 A permanently, up to 12 A in the short term|
|output signals for control of the central locks||max. 200 mA, switching to GND|
|length of impulses for the central locks||0.5 s or 4 s or possibly 60 s (selectable)|
|comply with regulation||ECE No.116|
|EMC||ECE No. 116, ČSN ETSI EN 301 489-1, -3, -7|
|radio spectrum||ETSI EN 301 511, ČSN ETSI EN 300 220-2|
|can be operated according to||ERC/DEC98(20,21), ECC/DEC/(04)06, ERC/DEC/(97)02, ECC/DEC/(06)01, VO-R/10 (ERC/REC 70-03)|
The JA-150ST optical wireless smoke and temperature detector detects fire inside residential or commercial premises. It allows these settings: smoke and heat, smoke or heat, smoke only, heat only.
It is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises.
Used to detect a fire risk in the interior of residential or commercial buildings. It comprises a siren that indicates a fire alarm both from the entire detector and from another fire detector in the system.