The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.
The JA-101KR-LAN is the basic element of the JABLOTRON 100+ security system. It enables flexible system setting and the easy protection of small commercial premises, houses, cottages, offices in a bus design, in a wireless or combined design. Module JA-111R is built-up in the CP.
The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.
The JA-110N power output module PG offers a switching relay (16 A) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).
The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.
It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.
The JA-112I indicator indicates section security or activation of a PG (1 - 128) output by lighting up a red LED. It is connected to the control and indicating equipment via a bus.
The JA-112J bus wall-mounted button is designed to release an emergency alarm or to control PG outputs.
All rights reserved © Jablotron 2019