GBT-212 Симулятор разбития стекла

GBT-212 разработан для тестирования звуковых детекторов разбития стекла. Он определяет изменения в давлении воздуха, вызванные деформацией или изгибанием стекла, а затем автоматически создает звуковую имитацию разбивания стекла.

BL-MCB Bootloader programmer

The BL-MCB programmer is intended for programming the CAN BUS of the MCB-02 module using the MCBLink 1.1 program. It primarily concerns finding out the current version of the “CAN” package and upgrading it to a newer version. Programmer connects to a PC via a USB.

MCB-03 Innovated CAN bus converter

This product replaces the older MCB-02 module. It supports reading data from CAN buses, newly also FD CAN and LIN bus. The module converts digital information to analogue form, in order to connect to the inputs of the CA-2103, CA-345 and other car alarms. It switches information on vehicle locked/unlocked status, ignition status, door open and close, hood open and close, etc.

MCO-04

The product is an extension module for CA-2103 and CA-345 series car alarms for controlling appliances in the vehicle - independent heating, power supply for additional detectors, control of optical signalling and other functions.

PLV-JA85PG Alternative housing

Alternative grey housing for JA-85P and JA-85B detectors.

AN-08-1.5 Self adhesive GSM antenna

Self adhesive antenna for CA-2103 (CA-180x, CU-08), GSM 900 / 1800MHz, 1.5 m cable

AN-13GPS Magnetic GPS antenna

Magnetic GPS antenna, SMA connector. Can be used with CA-2103 Athos (CA-1803, CU-08).

SAM-252.21 этикетка ALARM 38 x 23 мм

Самоклеящаяся этикетка - ALARM.