CA-2103 GSM/GPS car alarm

GSM/GPS car alarm with support for installation in vehicles with a CAN bus. Besides protection of car entries such as the doors, boot and hood you can extend the installation with up to 24 wireless detectors of the JA-100 and JA-18x series.

GSM/GPS car alarm

CA-2103 GSM/GPS car alarm

The car alarm offers partial and full arming and can be controlled by Jablotron remote controls, the original remote controls of the car or both systems. The car alarm offers a Geofence function - information about leaving a defined zone and a departure report (both using SMS). For this product MyJABLOTRON offers the drivers' logbook function with the possibility of identification of up to 99 drivers and a service for displaying the system status and the possibility of its control. The car alarm supports remote FW upgrades.

Especificaciones técnicas

Power supply 12/24 V DC (8 - 32V)
Idle current consumption max. 20 mA
Peak consumption (during communication) 1 A
Working band of the GSM module E-GSM / GPRS 850/900/1800/1900MHz
Output power of the transmitter 2 W for GSM850/900, 1 W for GSM1800/1900
Operating frequency 868.1MHz
Operating temperature range -20 °C to +70 °C
SIR output switching the supply voltage, max. load 1.3 A
Immobilization circuit 8 A permanently, up to 12 A in the short term

Productos relacionados

JA-185P Detector PIR de movimiento de personas

El JA-185P es un detector de movimiento PIR inalámbrico, de tamaño reducido, adecuado para la protección de pequeñas habitaciones o para interiores de automóviles.

JA-185B Detector inalámbrico miniatura de rotura de cristal

El JA-185B detecta la rotura de cristales de ventanas y puertas en el recinto donde está instalado. El detector utiliza el análisis del cambio en la presión del aire, combinado con la detección del sonido característico de la rotura de cristales

MCB-03 Innovated CAN bus converter

This product replaces the older MCB-02 module. It supports reading data from CAN buses, newly also FD CAN and LIN bus. The module converts digital information to analogue form, in order to connect to the inputs of the CA-2103, CA-345 and other car alarms. It switches information on vehicle locked/unlocked status, ignition status, door open and close, hood open and close, etc.

MCO-04 Car alarms output module

The product is an extension module for CA-2103 and CA-345 series car alarms for controlling appliances in the vehicle - independent heating, power supply for additional detectors, control of optical signalling and other functions.