JA-152P Wireless PIR motion detector
Besides standard positioning in a corner of a room it can be installed on a wall surface using a JA-196PL-S bracket where the detector is partly recessed and elegantly blends with the wall. For special applications such as e.g. ceiling mounting or an inclined detection angle the JA-191PL articulated holder can be used.
The detector has impulse activation.
The detector can be used to control programmable PG outputs.
The resistance to false alarms is adjustable at two levels
The detector provides standard resistance to white light at the level prescribed by the standard (up to 6000 lux).
The detector is addressable and it occupies one position in the system
|Compatible with||F-Link 2.0.0 and higher|
|Power||1 Lithium battery type CR123A (3 V/1500 mAh)
Please note: Battery not included
|Typical battery lifetime||4 years (the longest in smartwatch mode, at 20 °C)|
|Low battery voltage||< 2.4 V|
|Current consumption in standby mode||30 μA|
|Maximum current consumption||100 mA|
|Communication band||868.1 MHz, JABLOTRON protocol|
|Communication range||approx. 300 m (open area)|
|Recommended installation height||2.2 – 2.5 m above the floor|
|Detection angle/detection coverage||90°/12 m|
|Dimensions||62 x 110 x 40 mm|
|Weight (without battery)||90 g|
|Classification||Security grade 2/Environmental class II (according to EN 50131-1)|
|Operational environment||Indoor general|
|Operational temperature range||-10 °C to +40 °C|
|Average operational humidity||75 % RH, non-condensing|
|Certification body||Trezor Test s.r.o. (no. 3025)|
|Complies with||EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581|
|Can be operated according to||ERC REC 70-30|
The core element of the JABLOTRON 100+ security system. A control panel for protecting family houses, offices and smaller companies. It can only be installed by a trained technician with a valid Jablotron Alarms certificate.
The JA-107K is an advanced version of the JABLOTRON 100+ security system. It is designed for large living spaces, offices and businesses. It can only be installed by a trained technician with a valid Jablotron Alarms certificate.
The bracket has been designed for the installation of a PIR detector of the JA-1x2P series onto a plasterboard or brick wall. Thanks to this way of installation the detector in partly flush-mounted and fits the wall in a very elegant way.