Jablotron

JA-150EM-DIN Wireless module for the impulse output of an electric meter

The module for DIN-rail installation is designed to display electric meter readings, which is available for customers via the MyJablotron Web Self-Service.

Wireless module for the impulse output of an electric meter

JA-150EM-DIN Wireless module for the impulse output of an electric meter

The module contains a radio transmitter designed for the wireless transfer of information from the electric meter via the control panel to the MyJablotron portal. The impulse converter is directly supplied from the mains and it contains galvanically separated circuits for 4 kV. The converter is designed for connection to a standard impulse output of an SO electric meter. It can distinguish two rates (it can be connected to the rate control line of the load management system). It also has an independent input that can be used e.g. to monitor opening of the switchboard cover.

 

Specifications

Power supply 230V/50 Hz, device of protection class II.
Internal power consumption approx. 0.1 W
Operating frequency 868.1 MHz
Communication range approx. 300 m (line of sight)
IN input: low-voltage, galvanically separated from the mains,
operating voltage 5 V
max. external voltage surge 30V DC
max. connection conductor length 3 m.
PU input: low-voltage, galvanically separated from the mains
operating voltage 5 V
max. external voltage surge 30V DC
max. connection conductor length 3 m.
it is compatible with the impulse output of SO electric meters of class B in accordance with EN 62053-31
TA input: input for the connection of load management control conductor, max. 230 V AC
Dimensions: 68 x 96 x 18 mm, 1 DIN module
Working environment outdoor, protected, -20 to +60 °C
Ingress protection class front panel IP40 to EN 60529
The product complies with ETSI EN 300220-1, EN 50130-4, EN 55022 and EN 60950-1

Related products

JA-110F Bus flood detector

The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.

JA-111TH Bus temperature detector

It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.

JA-151TH Wireless temperature detector

It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.

JB-EXT-TH-B Bus outdoor thermometer

The bus thermometer can be used in an outdoor environment or an environment with demanding climatic conditions. 

JB-EXT-TH-R Wireless outdoor thermometer

The wireless thermometer can be used in an outdoor environment or an environment with demanding climatic conditions. 

JB-TS-PT1000 Universal temperature sensor type PT1000

Temperature sensor with a cable for the temperature measurement of gaseous, liquid and solid substances in the range of -50 °C to +200 °C.

LD-81 Flood detector

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector.