The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body motion inside buildings. Compared to standard motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation.
It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
The mounting spacer (PLV-P-ST) is a certified accessory for ceiling detectors; these can be used with wireless detectors to separate the antenna from the mounting surface and thus to potentially improve the range.
|Power supply||Up to 2x CR123A (3 V/1500 mAh)|
|Service life||1x CR123A 2 years/2x CR123A 4 years|
|Low battery voltage||<2.4 V|
|Communication frequency||868.1 MHz|
|Communication range||approx. 300 m (free terrain)|
|Recommended installation height||2.5 - 3.5 m above the floor level|
|Detection angle/detection coverage||360°/11 m (at a 3.5 m installation height)|
|Dimensions||⌀125 x 40 mm|
|Classification||Security level 2 (EN 2 50131-1)|
|Environment according to||EN 50131-1 II. indoor, general|
|Operation temperature range||-10 °C to +40 °C|
|It also meets the requirements of||EN 50131-2, EN 50131-5-3+A1, ETSI EN 300 220-1-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581|