JA-185B Wireless ceiling glass-break detector

A small-size glass-break sensor that detects window breaking. It is designed for building interior installations. It uses the analysis of air pressure variations combined with the characteristic sound of glass-breaking.

Wireless ceiling glass-break detector

JA-185B Wireless ceiling glass-break detector

It uses digital signal processing to avoid false alarms. It is addressable and occupies one position in the alarm.


Power Lithium battery type LS (T) 14500 (3.6 AA / 2.4 Ah)
Please note: Battery is not included
Typical battery life about 3 years
Communication band 868.1 MHz, Jablotron protocol
Communication range 100m (open area)
Detection range to 9 m
Environment according to EN 50131-1 II. general indoor
Operating temperature range -10 to +40 ° C
Security grade 2 according to EN 50131-1, CLC / TS 50131-2-7-1, EN 50131-5-3
Dimensions, weight 88 x 46 x 22 mm, 60g
Complies with ETSI EN 300220, EN50130-4, EN55022, EN 60950-1
Can be operated to ERC REC 70-03

Related products

SA-200-A Magnetic detector

Magnetic door contact (NC).

SA-201-A Magnetic detector miniature type

Magnetic door contact (NC) - miniature type .

SA-203 Magnetic detectors

Magnetic mini self-adhesive contact with wire, size: 33 x 8 x 9 mm

SA-204 Magnetic detectors

Surface metallic contact for industrial applications and also metallic doors, wires in armoured tube, Size: 49x17x9 mm, Working distance max. 40mm

SA-220 Magnetic detectors

Rolling metal contact also for metallic doors with cable in armoured tube, Size: 106x38x10mm, Working distance max. 75mm

SA-210 Magnetic detectors

Stud contact with terminals, Size: #248; 10mm, length - magnet 15 mm, relay 23 mm, White design

SA-211 Magnetic detectors

Stud mini contact with cable - EXTRA THIN #216; 9mm, length - magnet 3 mm, relay 14 mm, Working distance max. 19mm, White Design

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.