Jablotron

JA-180B Wireless acoustic glass-break detector

It is used to detect the breaking of glass window panes and glass surfaces in buildings. It reacts to the change of air pressure accompanied by the characteristic sound of breaking glass.

Wireless acoustic glass-break detector

JA-180B Wireless acoustic glass-break detector

This solution has a high reaction reliability for glass-break detection. The detection sensitivity is very easily adjustable according to distance and the dimensions of the protected windows. The detector has a high immunity against RF jamming and other signals with negative effects. It has been designed for mounting on a flat surface.

 

Technical specifications

Power Lithium battery type LS(T)14500 (3.6V / 2.4Ah AA)
Please note: Battery is not included
Typical battery lifetime about 3 years
Communication band 868.1 MHz, JABLOTRON protocol
Communication range approx. 100m (open area)
Detecting distance up to 9m
Operational environment according to EN 50131-1 II. General indoor
Operational temperature range -10 to +40 °C
Dimensions, weight 107 x 28 x 24 mm, 55g
Classification according to EN 50131-1, CLC/TS 50131-2-7-1, EN 50131-5-3 Grade II
Also complies with ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to ERC REC 70-03, ERC DEC (98) 20

Related products

JA-110B Bus acoustic glass-break detector

The JA-110B is a bus glass-break detector which recognizes the sounds of smashing window panes. The detection is based on dual technology (detection of changes in air pressure combined with the sound of breaking glass).

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.

JA-111M Mini bus magnetic detector

The JA-111M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-111MB Mini bus magnetic detector - brown

The JA-111MB is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-111SH Bus shock and tilt detector

It has two operational modes. The mode for the detection of shocks (vibrations) to doors, windows, etc. can be used to indicate attempts to breach these. The tilt detection mode can be used to indicate unwanted tampering with the object.

JA-118M BUS module for magnetic detectors - 8 inputs

The module provides 8 inputs designed especially for connecting magnetic detectors. Installation into a JA-190PL universal multipurpose box is recommended (or into a KU-68 wall –mounted universal box).

JA-150M Wireless magnetic detector with 2 universal inputs

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.

JA-150MB Wireless magnetic detector with 2 universal inputs - brown

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.