GD-04K Versatile GSM communicator and controller
It features 2 power outputs (250V/5A) for control. The outputs can be set as status or impulse outputs (impulse length 1s to 10h). When an output is controlled by ringing, a limitation on the number of control events can be assigned to each phone number (suitable e.g. for various paid entrances where a phone number should have a certain credit representing the number of entries).
It has 4 inputs which respond to grounding causing reports of the off/on type in the form of SMS and ringing. Up to 100 authorized numbers can be set for control and reporting.
The GD-04K can also be locally set via USB using setting software GD-Link 2.0 or remotely via settings website.
Backed-up operation in the case of a power supply failure (for up to 24 hours) is ensured through the connection of the GD-04A backup module (sold separately).
|Power||10.5 ÷ 15 V DC|
|Consumption in standby||approx. 25 mA (+17 mA per relay)|
|Max. device consumption during GSM communication||200 mA|
|GSM module operation band E-GSM||850 / 900 / 1800 / 1900 MHz|
|GSM RF output power||2 W for GSM 850/900
1 W for GSM 1800 / 1900
|Triggering of inputs A, B, C, D||connection to GND|
|X and Y outputs load:|
|- resistive load||max. 2.5 A/250 V AC|
|- inductive (capacitive), bulb load||max. 0.5 A/250 V AC|
|EMC||EN 301489-7, EN 55022 and EN 61000-6-3|
|Radio emissions||ETSI EN 301511|
|Operational environment||II. Indoor general (-10 °C to +40 °C)|
|Dimensions (no antenna)||76 x 110 x 33 mm|
|GSM antenna connection||by SMA connector|
Adhesive GSM antenna 900/1800MHz. Can be used with GD-04, JA-60GSM, JA-80Y, CA-1201, CA-1202.
The GD-04A back-up module, which provides David with the ability to work approx. 12 to 24 hours continually without an external power supply.
The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an JABLOTRON 100+ alarm system via a JA-150M wireless detector.