Jablotron

CP-201T-NW Resistor Temperature sensor

Resistor temperature sensor CP-201T-NW is designed for universal use in detecting temperature of liquid, gaseous, and solid substances.

Resistor Temperature sensor

CP-201T-NW Resistor Temperature sensor

They can be used to measure surface temperature of pipes using suitable accessories to fix the sensors on a pipe. The sensor has a temperature range of -25 °C to +105 °C which must not be exceeded, not even temporarily.

Technical specifications

Manufactured for JABLOTRON by SENSIT s.r.o, Czech Republic
Sensor type NTC 10 k, B25/100 = 3455 K
Sensor tolerance ± 1% at 25 °C
± 2°C in the range of -25 °C to 105 °C
Temperature sensor connection 2 conductors
Detection range -25 °C to 105 °C
Maximum input power 15 mW
Water resistance IP67 according to EN 60 529
Housing material brass
Housing diameter 4.6 ± 0,1 mm
Housing length 24 mm
Insulation resistance > 200 MW at 500 V DC, 25 ° C ± 3 °C
Supply cable - type unshielded PVC, 2 x 0.35 mm2
Supply cable - length 3 m

Related products

GD-04A Back-up module

The GD-04A back-up module, which provides David with the ability to work approx. 12 to 24 hours continually without an external power supply.

SD-TESTER Test Spray Smoke Sabre

Smoke Sabre Test Spray is designed to test the functionality of Jablotron’s optical smoke detectors. Contains 150 ml of testing aerosol

GD-02T Temperature sensor for GD-02-DIN

The GD-02T temperature sensor is an accessory of the GD-02-DIN universal GSM communicator and controller. It is necessary for using the temperature measurement function, and monitoring temperature limit values.

GD-04D DTMF module

The GD-04D DTMF module, which allows you to control David’s output relays by entering numeric codes (DTMF codes) on a telephone keypad during calls

TM-201 Electronic thermometer

The TM-201 electronic thermometer can be used in all installations where it is necessary to measure and display one to two temperatures.

TM-201A Multifunctional electronic thermometer

The TM-201A multi-functional electronic thermometer can be used in all installations where one or two temperature values need to be measured with a subsequent relay closing or opening action.