JA-190PL multipurpse installation box for JA-100 modules.
The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus . It is powered by the bus. It can be installed in a JA-190PL box.
The product is designed for branching the bus of the JABLOTRON 100 system. It is protected from being attacked by a pair of tamper contacts. It is supplied in a suitable JA-190PL mounting box.
The JA-110Z-B is designed to allow the connecting together of JA-100 bus lines. It can be installed in a JA-190PL box.
The JA-110Z-C is designed to allow the connecting together of JA-100 bus lines. It can be installed in a JA-190PL box.
Designed for current boosting of the bus, extension of the line length and galvanic isolation of the bus. Output current max. 2A. 2 independent bus output terminal boards - each providing 500 m of bus length.
RFID card and tag readers designed to easily enroll the JA-190J and JA-191J into the JA-100 system by using F-link SW.
Multipurpose outdoor installation box
A design installation box for Jablotron modules, fitted with a front and rear tamper switch. Suitable for input and output modules, hubs etc.
All rights reserved © Jablotron 2017