Jablotron

JA-150ST Wireless fire and temperature detector

The JA-150ST optical wireless smoke and temperature detector detects fire inside residential or commercial premises. It allows these settings: smoke and heat, smoke or heat, smoke only, heat only.

Wireless fire and temperature detector

JA-150ST Wireless fire and temperature detector

It has an alarm memory function where the LED still lights after the alarm state is over.

It is battery powered by alkaline batteries.

It is addressable and occupies one position in the alarm.

Specifications

Power 3 x AA alkaline batteries 1.5 V, 2.4 Ah)
Please note: Batteries are not included
Typical battery life about 2 years
Communication band 868.1 MHz, Jablotron protocol
Communication range about 300 meters (open area)
Dimensions diameter 126 mm, height 50 mm
Weight 150 g
Smoke detection optical dispersion
Sensitivity of smoke detector m = 0.11 ¸ 0.13 dB/m according to DIN EN 54-7
Temperature detection class A2 according to DIN EN 54-5
Temperature alarm +60 ° C to +70 ° C
Temperature range -10 ° C to +80 ° C
Meets EN 54-5, EN 54-7, EN 54-25
Complies with ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1
Can be operated to ERC REC 70-03

Related products

EI208DW Stand-alone carbon monoxide detector with display

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

EI208W Stand-alone carbon monoxide detector

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

JA-110F Bus flood detector

The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.

JA-110G-CO Bus module for connection of an Ei208W(D) CO detector

This is a plug-in module designed for direct installation in a stand-alone Ei208W or Ei208DW CO detector, which enables its bus connection to the JABLOTRON 100 system.

JA-110ST Bus combined smoke and temperature detector

The JA-110ST bus fire detector (optical and temperature detection) detects fire in residential and commercial buildings . Allows you to set detection: optical and thermal, optical or thermal, optical only or temperature only.

JA-110TP Bus indoor thermostat

In a building, up to 4 thermostats can be installed that can control up to 4 independent circuits. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.

JA-111ST Bus combined smoke and heat detector

It is used to detect fire hazards in the interior of residential or commercial buildings. The product is not designed to be installed in industrial premises. The detector is powered via the control panel bus (EN 54-7; EN 54-5).

JA-111ST-A Bus combined smoke and heat detector

Used to detect a fire risk in the interior of residential or commercial buildings. It comprises of a siren that indicates a fire alarm, both from the entire detector and from another fire detector in the system.