JB-118N Bus signal PG output module - 8 outputs
It is designed for mounting in JA-19xPL multi-purpose boxes or on a DIN rail. The outputs are isolated from the bus. It is set using the DIP switch.
It is not addressable (does not occupy a position in the security system).
|Power||from control panel BUS 12 V DC (9 … 15 V)|
|Current consumption - outputs off/on||5 mA/10 mA|
|Current consumption for cable selection||10 mA|
|Maximum current from +U output (electronic fuse)||< 100 mA
(all connected devices must be included in current calculations)
|Maximum switched current/voltage for each output||100 mA/38 V|
|Dimensions||77 x 40 x 15 mm|
|Classification||Security grade 2/Environmental class II (according to EN 50131-1)
Only when installed into the JA-194PL or JA-195PL mounting box
together with the JA-111H TRB module!
|Operational environment||indoor general|
|Operational temperature range||-10 °C to +40 °C|
|Average operational humidity||75 % RH, non-condensing|
|Certification body||Trezor Test s.r.o. (no. 3025)|
|Complies with||EN 50131-1 ed. 2+A1+A2, EN 50131-3, EN 50130-4 ed. 2+A1, EN 55032, EN 50581|