The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection certainty.
The detector guards the same way as a classic PIR motion detector.
When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm report to the control panel.
|Power supply||control panel bus 12 V (9 ... 15 V)|
|Current consumption in standby mode||5 mA|
|Current consumption for cable choice||5 mA|
|Recommended installation height||2.5 m above floor level|
|PIR sensor detection angle/detection range||110 degrees / 12 m (with standard lens)|
|Operational temperature range||-10 to +40 °C|
|Dimensions||110 x 60 x 55 mm|
|Complies with||EN 50130-4, EN 55022