JA-122PW Bus dual PIR and MW motion detector

This product is a bus device of the JABLOTRON 100+ system. It is designed to detect human body movement inside buildings. A high immunity to false alarms is reached thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, however, when the PIR detects movement in a guarded area, the MW part is activated and confirms the previous PIR activation.

 

Bus dual PIR and MW motion detector

JA-122PW Bus dual PIR and MW motion detector

The product features a white lens that provides standard white light immunity as defined by the norm (up to 6000 lux). The immunity to false alarms can be set at two levels, PIR and MW. The detector operates with a pulse reaction and takes up a single position in the system.

Technical specifications

Power supply from the control panel bus 12 V DC (9 ... 15 V)
Current consumption
- in standby mode 5 mA
- for cable choice 16 mA
Recommended installation height 2.2 – 2.5 m above floor level
Detection angle/PIR coverage 90°/12 m
Detection angle/MW coverage 80°/12 m
MW Frequency 24.125 GHz
Maximum MW radio-frequency power (ERP) 30 mW
Dimensions: 150 x 63 x 40 mm
Weight 120 g
Classification Security grade 2/Environmental class II (According to EN 50131-1)
Environment Indoor general
Operating temperature range -10 °C to +40 °C
Average operational humidity 75 % RH, w/o condensation
Certification body Trezor Test s.r.o. (no. 3025)
In compliance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4
Operating conditions according to general authorization ERC REC 70-03

Similar products

JA-120PW Bus PIR / MW motion detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection certainty.

JA-122PW (G) Bus dual PIR and MW motion detector

This product is a bus device of the JABLOTRON 100+ system. It is designed to detect human body movement inside buildings. A high immunity to false alarms is reached thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, however, when the PIR detects movement in a guarded area, the MW part is activated and confirms the previous PIR activation.

Related products

JA-196PL-L The dual PIR and MW wall holder

The bracket has been designed for the installation of a dual PIR and MW detector, the JA-122PW or the JA-162PW onto a plasterboard or brick wall. Thanks to this way of installation the detector is partly flush-mounted and fits the wall in a very elegant way.

ACC-S3.5X40 Wood screws.

Suitable for wall-mounting of most alarm devices. Pozidrive type.

ACC-D-UX5R UX 5 R Universal plastic wall plugs for screws.

Suitable for wall-mounting of most alarm devices.