Jablotron

JA-110N-DIN Bus DIN power output module

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.

Bus DIN power output module

Technical specifications

Power from control panel BUS 12 V (9 … 15 V)
Current consumption in standby mode (relay off/on) 5 mA/45 mA
Current consumption for cable selection 45 mA
Relay contact capacity (galvanically and securely separated from the BUS) Class protection II
- Maximum switched voltage 250 V AC/24 V DC
- Resistive load (cosφ=1) max. 16 A
- Inductive (capacitive) load (cosφ=0,4) max. 8 A
- Halogen lighting max. 1000 W
- Direct current DC 384 W
- Minimum DC switched output 0.5 W
Connected wires diameter max. 2x 1.5 mm2
max. 1x 2.5 mm2
Dimensions 18 x 90 x 64 mm
Operational environment Indoor general
Operational temperature range -10 to + 40 °C
Protection degree IP-20
Complies with EN 50130-4, EN 55022, EN 60950-1
DIN rail EN60715

Related products

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.

JA-112I Bus section/output PG activation indicator

The JA-112I indicator indicates section security or activation of a PG (1 - 128) output by lighting up a red LED. It is connected to the control and indicating equipment via a bus.

JA-150N Wireless power output module PG

The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).

JA-151N Wireless signal output module PG

The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100+ system (PG 1 to PG 32).

JB-110N Bus PG power output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output power relay. It can be used, for example, to control lighting, fans, etc.

JB-111N Bus signal PG output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output signal relay. For example, it can be used to control an electric door lock, blocking, indication, etc.

JB-118N Bus signal PG output module - 8 outputs

The product is a system device for the JABLOTRON 100+ . It provides eight galvanically isolated outputs in all. For example, it can be used to control optical indicating elements, radio communicators or power relays. 

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.