CA-2103 GSM/GPS car alarm

GSM/GPS car alarm with support for installation in vehicles with a CAN bus. Besides protection of car entries such as the doors, boot and hood you can extend the installation with up to 24 wireless detectors of the JA-100 and JA-18x series.

GSM/GPS car alarm

CA-2103 GSM/GPS car alarm

The car alarm offers partial and full arming and can be controlled by Jablotron remote controls, the original remote controls of the car or both systems. The car alarm offers a Geofence function - information about leaving a defined zone and a departure report (both using SMS). For this product MyJABLOTRON offers the drivers' logbook function with the possibility of identification of up to 99 drivers and a service for displaying the system status and the possibility of its control. The car alarm supports remote FW upgrades.

Specyfikacja techniczna

Power supply 12/24 V DC (8 - 32V)
Idle current consumption max. 20 mA
Peak consumption (during communication) 1 A
Working band of the GSM module E-GSM / GPRS 850/900/1800/1900MHz
Output power of the transmitter 2 W for GSM850/900, 1 W for GSM1800/1900
Operating frequency 868.1MHz
Operating temperature range -20 °C to +70 °C
SIR output switching the supply voltage, max. load 1.3 A
Immobilization circuit 8 A permanently, up to 12 A in the short term

Produkty powiązane

JA-185P Bezprzewodowy sufi towy czujnik pir

JA-185P jest bezprzewodowym czujnikiem ruchu PIR przeznaczonym do instalacji na sufi cie pomieszczenia lub samochodu. Jego mały rozmiar powoduje, że doskonale zlewa się z otoczeniem.

JA-185B Bezprzewodowy czujnik zbicia szyby

JA-185B jest miniaturowym bezprzewodowym czujnikiem reagującym na stłuczenie szyby. W celu wykluczenia przypadkowego załączania zastosowano tutaj podwójną analizę alarmu.

MCB-03 Innovated CAN bus converter

This product replaces the older MCB-02 module. It supports reading data from CAN buses, newly also FD CAN and LIN bus. The module converts digital information to analogue form, in order to connect to the inputs of the CA-2103, CA-345 and other car alarms. It switches information on vehicle locked/unlocked status, ignition status, door open and close, hood open and close, etc.

MCO-04 Car alarms output module

The product is an extension module for CA-2103 and CA-345 series car alarms for controlling appliances in the vehicle - independent heating, power supply for additional detectors, control of optical signalling and other functions.