CA-2103 GSM/GPS car alarm
The car alarm offers partial and full arming and can be controlled by Jablotron remote controls, the original remote controls of the car or both systems. The car alarm offers a Geofence function - information about leaving a defined zone and a departure report (both using SMS). For this product MyJABLOTRON offers the drivers' logbook function with the possibility of identification of up to 99 drivers and a service for displaying the system status and the possibility of its control. The car alarm supports remote FW upgrades.
Technische specificaties
Power supply | 12/24 V DC (8 - 32V) |
---|---|
Idle current consumption | max. 20 mA |
Peak consumption (during communication) | 1 A |
Working band of the GSM module | E-GSM / GPRS 850/900/1800/1900MHz |
Output power of the transmitter | 2 W for GSM850/900, 1 W for GSM1800/1900 |
Operating frequency | 868.1MHz |
Operating temperature range | -20 °C to +70 °C |
SIR output | switching the supply voltage, max. load 1.3 A |
Immobilization circuit | 8 A permanently, up to 12 A in the short term |
Gerelateerde producten
JA-185P Draadloze plafond PIR detector
De JA-185P is een kleine draadloze PIR detector geschikt voor het beschermen van kleine ruimtes of auto’s. Hij is ontworpen om aan het plafond geïnstalleerd te worden.
JA-185B Draadloze Glas breuk detector
De JA-185B is een klein formaat glasbreuk sensor, het detecteert het breken van een raam. De glasbreuk detector analyseert luchtdruk veranderingen in combinatie met geluidsanalyse.
MCB-03 Innovated CAN bus converter
This product replaces the older MCB-02 module. It supports reading data from CAN buses, newly also FD CAN and LIN bus. The module converts digital information to analogue form, in order to connect to the inputs of the CA-2103, CA-345 and other car alarms. It switches information on vehicle locked/unlocked status, ignition status, door open and close, hood open and close, etc.
MCO-04 Car alarms output module
The product is an extension module for CA-2103 and CA-345 series car alarms for controlling appliances in the vehicle - independent heating, power supply for additional detectors, control of optical signalling and other functions.