Jablotron

JA-182SH Wireless shock or tilt detector

The shock detection mode monitors doors, windows, light partitions etc. indicating attempts at rough force. The tilt detection mode detects the unauthorised handling of a valuable object.

Wireless shock or tilt detector

JA-182SH Wireless shock or tilt detector

The detector uses a triple-axis semiconductor accelerometer with a digital output.

Digital signal processing guarantees a high detection certainty.

The detector is powered by a battery and occupies a single position in the security system.

 

Specifications

Power Lithium battery type CR-123A, 3 V / 1400 mAh
Please note: Battery is not included
Tilt range (depending on settings) 10 ° - 45 °
Typical battery life about 2 years (up to 20 activations per day in power save mode)
Communication band 868.1 MHz, Jablotron protocol
Communication range 300m (open area)
Dimensions 75 x 31 x 26 mm
Environment according to EN 50131-1, Class II. general indoor
Operating temperature range -10 to +40 ° C
Security grade 2 according to EN 50131-1, EN 50131-5-3
Complies with ETSI EN 300220, EN50130-4, EN 55022, EN 60950-1
Can be operated to ERC REC 70-03

Related products

JA-110B Bus acoustic glass-break detector

The JA-110B is a bus glass-break detector which recognizes the sounds of smashing window panes. The detection is based on dual technology (detection of changes in air pressure combined with the sound of breaking glass).

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.

JA-111M Mini bus magnetic detector

The JA-111M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-111MB Mini bus magnetic detector - brown

The JA-111MB is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-111SH Bus shock and tilt detector

It has two operational modes. The mode for the detection of shocks (vibrations) to doors, windows, etc. can be used to indicate attempts to breach these. The tilt detection mode can be used to indicate unwanted tampering with the object.

JA-118M BUS module for magnetic detectors - 8 inputs

The module provides 8 inputs designed especially for connecting magnetic detectors. Installation into a JA-190PL universal multipurpose box is recommended (or into a KU-68 wall –mounted universal box).

JA-150M Wireless magnetic detector with 2 universal inputs

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.

JA-150MB Wireless magnetic detector with 2 universal inputs - brown

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.