JA-162PC Wireless PIR motion detector with a 90° verification camera
The camera is equipped with a visible flash for taking photos in the dark. The images are saved in the internal memory of the detector and then they are forwarded to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo by request.
The detector takes one position in the system and should be installed by a trained technician with a valid certificate issued by an authorised distributor.
The photo-verification can be used only after the registration of the system to MyJABLOTRON or with subsequent ARC service.
This device is compatible with JA-103K, JA-107K, JA-102K control panel units and upper models.
Technical specifications
Power | 2x lithium battery type CR123A 3 V/1.5 Ah |
---|---|
Typical batteries lifetime | about 2 years (1 activation and 1 series of photos a day) Please note: Batteries are not included |
LowBatt voltage | ≤2.8 V |
Quiescent current consumption | 90 µA |
Maximum current consumption | 700 mA |
Communication frequency | 868.1 MHz, JABLOTRON protocol |
Maximum radio-frequency power (ERP) | 11 mW |
Communication range | approx. 300 m (unrestricted area) |
Recommended installation height | 2.5 m above the floor |
PIR Detection angle/detection coverage | 90°/12 m |
Horizontal camera capture angle | 90° |
Range of the flash | max. 3 meters |
Resolution of the camera | LQ 320 x 240; HQ 640 x 480 pixels |
Photo size LQ/HQ | 5–20 kB/5–64 kB |
Typical (LQ) photo transmission time to the control panel | up to 20 s (10 s) |
Typical (HQ) photo transmission time to the control panel | up to 130 s (60 s) |
Typical photo transfer time to the server | 15 s/GPRS; 2 s/LAN |
Dimensions, weight (without batteries) | 150 x 65 x 44 mm, 130 g |
Operational temperature range | -10 °C to +40 °C |
Operational environment | Indoor general |
Average operational humidity | 75% RH, without condensation |
Classification | Security grade 2/Environmental class II (EN 50131-1) |
Certification body | Trezor Test no. 3025 |
Complies with | EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 |
Can be operated according to | ERC/REC 70-03 |
Recommended screw | 2 x ø 3.5 x 40 mm (countersunk head) |
Related products
BAT-3V0-CR123A Lithium battery
Lithium battery
JA-103K GSM Control panel with LAN communicator
The core element of the JABLOTRON 100+ security system. A control panel for protecting family houses, offices and smaller companies. It can only be installed by a trained technician with a valid Jablotron Alarms certificate.
JA-107K GSM Control panel with LAN communicator
The JA-107K is an advanced version of the JABLOTRON 100+ security system. It is designed for large living spaces, offices and businesses. It can only be installed by a trained technician with a valid Jablotron Alarms certificate.
JA-196PL-L The dual PIR and MW wall holder
The bracket has been designed for the installation of a dual PIR and MW detector, the JA-122PW or the JA-162PW onto a plasterboard or brick wall. Thanks to this way of installation the detector is partly flush-mounted and fits the wall in a very elegant way.
ACC-S3.5X40 Wood screws.
Suitable for wall-mounting of most alarm devices. Pozidrive type.
ACC-D-UX5R UX 5 R Universal plastic wall plugs for screws.
Suitable for wall-mounting of most alarm devices.