Jablotron

JA-160PC Wireless PIR motion detector combined with a camera

The JA-160PC is wireless component of the JABLOTRON 100 system. It serves for the detection of human movement in building interiors and visual alarm confirmation.

Wireless PIR motion detector combined with a camera

JA-160PC Wireless PIR motion detector combined with a camera

The camera takes colour photos with a resolution of up to 640 x 480 pixels by detecting human movement while the system is set. The camera is equipped with a visible flash for taking photos in the dark. The images are saved in the internal memory of the detector and then they are forwarded to the control panel. From the control panel they can be sent to an external mass storage area, ARC and a user. The detector can also take a photo on command if it is required (e.g. fire alarm confirmation).

Technical specifications

Power 2 AA (LR6) 1.5V
Please note: Batteries are not included
Typical lifetime about 2 years (1 activation takes 1 series of photos a day)
Recommended installation height 2.5 m above the floor
Detection angle / detection coverage: 55° / 12 m (basic lens)
Horizontal camera capture angle 43°
Range of the flash max. 3 meters
Resolution of the camera LQ 320 x 240; HQ 640 x 480 pixels
Photo size LQ/HQ (typically) 2-10 kB / 2-64 kB (6 kB / 35 kB)
Typical (LQ) photo transmission time to the control panel (ideally) up to 20 sec. (10 sec.)
Typical (HQ) photo transmission time from the control panel (ideally) up to 130 sec. (60 sec.)
Typical photo transfer time from the system to the server 15 s/GPRS; 2 s /LAN
Operational environment according to EN 50131-1 II. Indoor general
Operational temperature range -10 to +40 °C
Dimensions, weight 110 x 60 x 55 mm, 102 g
Classification Grade 2
According to EN 50131-1, EN 50131-2-2
Also complies with ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to ERC REC 70-03

Related products

JA-110P Bus PIR motion detector

The JA-110P is a bus PIR motion detector designed to protect interiors by infrared motion detection in the room . The characteristics of detection can be optimized by using interchangeable lenses.

JA-111P-WG Bus PIR motion detector

It is designed to detect human body motion inside buildings.

JA-111P-WW Bus PIR motion detector

It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90° / 12 m.

JA-120PB Bus combined PIR motion and glass-break detector

It serves for the detection of human movement in building interiors and for the detection of breaking glass windows. This detector combines two sensors (PIR motion & acoustic glass break) in one housing.

JA-120PC Bus PIR Motion Detector with Camera

The JA-120PC is a bus-powered PIR movement detector with a colour camera which takes colour images of up to 640 x 480 pixels definition.

JA-120PC (90) Bus PIR motion detector with 90° photo-verification camera

Used for motion detection inside buildings, including visual alarm confirmation. Taking a photo is activated by motion, so the cause of the alarm is always indicated in the image. Guaranteed detection coverage 90°/12 m.

JA-120PW Bus PIR / MW motion detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection certainty.

JA-150IR Wireless optical barrier

Detector is designed for the indication of a breach into a protected area by crossing the IR line.