JA-180W Wireless PIR and MW combined detector

The detector is used for human motion detection in the interior of a building.

Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

Wireless PIR and MW combined detector

JA-180W Wireless PIR and MW combined detector

When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.

The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.

It is addressable and occupies one position in the alarm.

Technical specifications

Power supply Lithium battery type CR14500 (AA) 3.6 V/2.45 Ah
Please note: Battery is not included
Nominal current 21 μA
Maximal current 38 μA
Battery low voltage ≤ 2.6 V
Typical battery lifetime approx. 2 years (DIP no. 3 to NORM)
Communication band 868.1 MHz, Jablotron protocol
Communication range approx. 300 m (open area)
Recommended installation height 2.0 to 2.5 m above floor level
PIR detection angle/detection range 110°/12 m (with basic lens)
MW detection angle/detection range 24°/15 m (open area)
MW detection angle/detection range 90°/15 m (sample room)
MW detection range/frequency 9.35 GHz
Dimensions 110 x 60 x 51 mm
Weight 114 g
Classification Security grade 2/Environmental class II
- according to EN 50131-1, EN 50131-2-4, EN 50131-5-3
- operational environment Iindoor general
- operational temperature range -10 °C to +40 °C
- average humidity 75 % RH non condensing
- certification body Trezor Test s,r.o. (no. 3025)
Complies with ETSI EN 300 220, ETSI EN 300 440, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to ERC REC 70-03

Related products