Jablotron

JA-180PB Wireless PIR and glass-break combined detector

The JA-180PB combines the JA-180P PIR motion sensor with a glass-break sensor in one housing. Each sensor is enrolled to the control panel separately.

Wireless PIR and glass-break combined detector

JA-180PB Wireless PIR and glass-break combined detector

The dual technology glass-break sensor reacts to air pressure changes followed by sound analysis to ensure a high immunity to false alarms.

The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.

It is addressable and occupies two positions in the alarm.

 

Specifications

Power (PIR) Lithium battery type LS (T) 14500 (3.6 AA / 2.4 Ah)
Please note: Battery is not included
Power (GBS) lithium battery type LS (T) 14250 (3.6V ½ AA / 1.2 Ah)
Typical battery life about 3 years (PIR sleep time 5 min)
Communication band 868.1 MHz, Jablotron protocol
Communication range 300m (open area)
Recommended installation height 2.5 m above floor
Detection angle / PIR sensor detection range 120 ° / 12 m (standard lens)
Glass break detection range: 9m (glass min. 60 x 60cm)
Environment according to EN 50131-1 II. general indoor
Operating temperature range -10 to +40 ° C
Dimensions, weight 110 x 60 x 55 mm, 120 g
Classification EN 50131-1, EN 50131-2-2, EN 50131-5-3 grade 2
Complies with ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1
Can be operated to ERC REC 70-03

p

Related products

SA-200-A Magnetic detector

Magnetic door contact (NC).

SA-201-A Magnetic detector miniature type

Magnetic door contact (NC) - miniature type .

SA-203 Magnetic detectors

Magnetic mini self-adhesive contact with wire, size: 33 x 8 x 9 mm

SA-204 Magnetic detectors

Surface metallic contact for industrial applications and also metallic doors, wires in armoured tube, Size: 49x17x9 mm, Working distance max. 40mm

SA-220 Magnetic detectors

Rolling metal contact also for metallic doors with cable in armoured tube, Size: 106x38x10mm, Working distance max. 75mm

SA-210 Magnetic detectors

Stud contact with terminals, Size: #248; 10mm, length - magnet 15 mm, relay 23 mm, White design

SA-211 Magnetic detectors

Stud mini contact with cable - EXTRA THIN #216; 9mm, length - magnet 3 mm, relay 14 mm, Working distance max. 19mm, White Design

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.