Jablotron

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.

Wireless multifunctional relay for DIN-rail installation

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes – the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail. It occupies one position in the system.

Technical specifications

Operational power 230 V/50 Hz
Own power consumption for 230 V AC (min/max) 0.5 W/1.7 W
Communication band 868.1 MHz, Jablotron protocol
Antenna Internal/optional external antenna type AN-868
MFR Contact rating - protection class II:
- Maximum switching voltage 250 V AC
- Resistive load (cosφ=1) max.16 A
- Inductive, capacitive load (cosφ=0,4) max. 8 A
- Halogen lights max. 1000 W
- Minimum switching DC power 0.5 W
Recommended connection wires max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2
IP covering IP-20 (according to EN 65529),
IP-40 (with a front panel)
Dimensions 18 x 90 x 64 mm
Weight 65 g
Operational temperature range -10 to + 40°C, relative humidity 75% no condensation
Complies with ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1, EN 50581
Can be operated to ERC REC 70-03

Related products

JA-112I Bus section/output PG activation indicator

The JA-112I indicator indicates section security or activation of a PG (1 - 128) output by lighting up a red LED. It is connected to the control and indicating equipment via a bus.

JA-150N Wireless power output module PG

The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).

JA-151N Wireless signal output module PG

The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100+ system (PG 1 to PG 32).

JB-110N Bus PG power output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output power relay. It can be used, for example, to control lighting, fans, etc.

JB-111N Bus signal PG output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output signal relay. For example, it can be used to control an electric door lock, blocking, indication, etc.

JB-118N Bus signal PG output module - 8 outputs

The product is a system device for the JABLOTRON 100+ . It provides eight galvanically isolated outputs in all. For example, it can be used to control optical indicating elements, radio communicators or power relays. 

JA-110N-DIN Bus DIN power output module

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.