JA-162PB-GR Wireless combined PIR motion and glass-break detector - grey
The detector uses a Passive Infra-Red sensor for movement detection. Breaking glass is detected by a Glass Break sensor, which analyses air pressure changes and sounds to detect the breaking of a glass window. The detector should be installed by a trained technician with a valid certificate issued by an authorized distributor.
This device is compatible with JA-103K, JA-107K, JA-102K control panel units and upper models.
|Power||2x Lithium battery CR123A (3.0 V/1.5 Ah)
Please note: Batteries are not included.
|Typical battery lifetime||approx. 3 years|
|Low battery voltage||<2.7 V|
|Quiescent current consumption||50 uA|
|Maximal current consumption||50 mA|
|Communication band||868.1 MHz, protocol JABLOTRON|
|Maximum radio-frequency power (ERP)||<25 mW|
|RF range||500 m (open area)|
|Recommended installation height||2.5 m above the floor|
|PIR detection angle/range||90°/12 m|
|GBS detection angle/range||90°/9 m|
|Dimensions||150 x 63 x 40 mm|
|Weight (w/o batteries)||135 g|
|Classification||Security grade 2/Environmental class II (according to EN 50131-1)|
|Operating temperature range||-10 °C to +40 °C|
|Average operational humidity||75% RH, w/o condensation|
|Certification body||Trezor Test s.r.o. (no. 3025)|
|In compliance with||ETSI EN 300 220-1,2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6|
|Can be operated according to||ERC REC 70-03|
|Recommended screw||2 x ø 3.5 x 40 mm (countersunk head)|