Jablotron

SD-283ST Wired combined smoke and heat detector with built in siren

Detector is used to detect fire hazards in the interior of residential or commercial buildings. The detector is also suitable for installing in caravan trailers or mobile homes. The product is not designed to be installed in industrial premises.

Wired combined smoke and heat detector with built in siren

SD-283ST Wired combined smoke and heat detector with built in siren

The detector indicates fire hazard using the built-in LED indicator and acoustic signalling. The detector can also be powered from an external 12 V DC source or from the alarm system control panel and it provides ALARM and TMP outputs. When the detector is used with inserted batteries (3x 1.5 V AA), it can continue operating as a stand-alone detector when the external 12 V power supply is disconnected.

The SD-283ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light. It is very sensitive to large dust particles which are present in dense smoke. It is less sensitive to smaller particles generated by the combustion of liquids such as alcohol. That is why the fire detector also contains a built-in heat detector which has a slower reaction but is much better at detecting fire which generates only a small amount of smoke.

Technical specifications

Power 9 – 15 V DC / 3.5 mA (150 mA during an alarm)
or 3 pcs of AA 1.5 V alkaline batteries
Please note: Batteries are not included
Typical lifetime approx. 3 years
Smoke detection optical light scattering
Smoke detector sensitivity m = 0.11 - 0.13 dB / m
pursuant to EN 14604:2005, EN 54-7
Heat detection class A1 according to EN 54-5
Alarm temperature + 60 °C to +65 °C
Operating temperature range -10 °C to +65 °C
Dimensions, weight diameter 126 mm, height 52 mm, 150 g
Conformity EN 50130-4, EN 55022

Related products

EI208DW Stand-alone carbon monoxide detector with display

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

EI208W Stand-alone carbon monoxide detector

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

GS-133 Gas Detector - 12 V DC

The GS-133 detector is used to indicate leaking of explosive gases (natural gas, methan, propane, butane). The detector detects two levels of gas concen-tration - different output reactions.

GS-133-24 Gas Detector

The GS-133-24 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL etc). The detector detects two levels of gas concentration. (24V DC)

GS-208-CO Wired module for connection of the Ei208W(D) CO detector

This is a plug-in module designed for direct integration in the Ei208W or Ei208DW stand-alone CO detector that will enable its wired connection to a security or another system.

LD-12 The LD-12 flood detector

The detector is a water flood indicator for rooms (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission.The LD-12 detector can be connected to the input terminals of alarm systems.

LD-81 The LD-81 flood detector

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector.

SD-503ST Stand-alone combined smoke and heat detector

The SD-503ST is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises.