Jablotron

CT-01 Shutter-movement detector

The CT-01 is wired detector for detecting the unauthorised movement of external window shutters on houses or buildings. Can be connected with JA-150M or JA-81M

Shutter-movement detector

CT-01 Shutter-movement detector

In practice the CT-01 wired outputs are connected to the wired input of a JA-81M door detector to connect the CT-01 signals to the Oasis alarm system. False alarms caused by the wind moving the shutters are avoided by the door detector only raising the alarm when at least 3 pulses are received from the CT-01 in 5 seconds.

Technical specifications

Output contact of detector 100 mA / 60V
Range of movement 5 to 260 cm
Dimensions 94 x 102 x 17 mm
Environment according to
EN 50131-1
III. outside protected
Operating temperature range -25 to +50 ° C

Related products

JA-110B Bus acoustic glass-break detector

The JA-110B is a bus glass-break detector which recognizes the sounds of smashing window panes. The detection is based on dual technology (detection of changes in air pressure combined with the sound of breaking glass).

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.

JA-111M Mini bus magnetic detector

The JA-111M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-111MB Mini bus magnetic detector - brown

The JA-111MB is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-111SH Bus shock and tilt detector

It has two operational modes. The mode for the detection of shocks (vibrations) to doors, windows, etc. can be used to indicate attempts to breach these. The tilt detection mode can be used to indicate unwanted tampering with the object.

JA-112M Bus module for magnetic detectors – 2 inputs

The product is a bus system device for the JABLOTRON 100+ . A bus module used to connect a wide range of magnetic switches to detect when doors and windows are opened. It has two independent inputs with the option of fully setting their properties. 

JA-118M BUS module for magnetic detectors - 8 inputs

The module provides 8 inputs designed especially for connecting magnetic detectors. Installation into a JA-190PL universal multipurpose box is recommended (or into a KU-68 wall –mounted universal box).

JA-150M Wireless magnetic detector with 2 universal inputs

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.