Jablotron

JA-192Y GSM communicator module

The GSM communicator module is designed for the JA-103K or JA-107K alarm control panel belonging to the JABLOTRON 100+ system.

GSM communicator module

JA-192Y GSM communicator module

The control panel fitted with a JA-192Y communicates through a mobile network with a central monitoring station, allows remote control via the web and mobile applications and sends alarm SMSes and voice messages.

It allows the system to be remotely set up using the F-Link settings program.

Technical specifications

Module power supply 12V DC (from the control panel)
Average current consumption approx. 5 mA (depends on the GSM signal strength)
Peak current consumption 175 mA
GSM communication band QUAD-BAND, 850/900/1800/1900 MHz
I&HAS classification Security grade 2/Environmental class II (Note: this applies only in combination with a security-grade-2-certified control panel. For more info about ARC settings, see the Control panel installation manual)
- Conforms to EN 50131-1 +A1 ¬+A2, EN 50131-3, EN 50131-10, EN 50136-1, EN 50136-2, ANSI SIA DC-09
- Certification body Trezor Test s.r.o.
- Dimensions 70 x 37 x 25 mm
- Weight 25 g
- Operational environment indoor general
- Operational temperature -10 °C to 40 °C
- Average operational humidity 75% RH, non-condensing
- Compatible with RCT (ARC receiver) According to communication protocols
- SPT communicator type SPT type Z (control panel expansion module)
- AS/SPT interface Pass-through
- Supported ATS class/communication protocol:
ATS class 1)ATS interfaceTransmission protocol
SP2 GSM-SMS JABLO SMS
SP3 - SP5 GSM-GPRS (IP) JABLO IP
ANSI SIA DC-09
DP4 2) LAN (IP)
GSM-GPRS (IP)
JABLO IP
ANSI SIA DC-09
Notes:
1. The ATS classes listed in the ATS interface configuration with a transmission protocol is the maximum of what is possible to declare when creating an alarm communication path. The operational classification has to be determined by the installer after the ARC’s agreement. The alarm communication path is created according to CLC/TS 50136-7 application guidelines.
2. DP4 is supported only in the configuration with the LAN communicator.
Warning:
LAN communication provided via WIFI or GSM is considered as radio communication therefore it is not possible to use a GSM communicator and a WIFI WAN network when a DPx path is created.
Explanatory notes:
SPx: One communication path to an ARC (Single path) = 1 transmission medium
DPx: Dual communication path to an ARC (Dual path) = 2 different transmission media, for example Radio communication (GSM) and Metallic or Optical cables (PSTN, LAN).
Also complies with EN 62368-1, ETSI EN 301 511, EN 50130-4 +A1, ETSI EN 301 489-1, ETSI EN 301 489-7, EN 55032, ETSI EN 301 419-1, EN 50581
Caller ID (CLIP) ETSI EN 300 089
Can be operated according to CEPT/ECC/DEC/(04)06

Related products

JA-190X Telephone communicator module

A control panel with this module connected to a phone line transmits alarm voice messages,communicates with ARCs and allows remote access. The communicator uses tone dialing and features basic surge protection.

JA-190Y GSM communicator module

The GSM communicator module is designed for the JA-100K and JA-100KR alarm control panels. It serves as a backup and extension of the LAN communicator, which is part of the control panel.