Jablotron

JA-111SH Bus shock and tilt detector

It has two operational modes. The mode for the detection of shocks (vibrations) to doors, windows, etc. can be used to indicate attempts to breach these. The tilt detection mode can be used to indicate unwanted tampering with the object.

Bus shock and tilt detector

JA-111SH Bus shock and tilt detector

This may be used for safes, artworks etc. The detector uses a semiconductor tri-axial accelerometer with a digital output. Its signal processing guarantees a high immunity against false alarms.

Technical specifications

Power from control panel bus 12 V (9…15 V)
Current consumption in standby mode 5 mA
Current consumption for cable choice 5 mA
Dimensions 55 x 27 x 16 mm
Classification grade 2
according to EN 50131-1, CLC/TS 50131-2-8
Operational environment EN 50131-1 II. Indoor general
Operating temperature range -10 to +40 °C
Also complies with EN 50130-4, EN 55022

Related products

SA-200-A Magnetic detector

Magnetic door contact (NC).

SA-201-A Magnetic detector miniature type

Magnetic door contact (NC) - miniature type .

SA-203 Magnetic detectors

Magnetic mini self-adhesive contact with wire, size: 33 x 8 x 9 mm

SA-204 Magnetic detectors

Surface metallic contact for industrial applications and also metallic doors, wires in armoured tube, Size: 49x17x9 mm, Working distance max. 40mm

SA-220 Magnetic detectors

Rolling metal contact also for metallic doors with cable in armoured tube, Size: 106x38x10mm, Working distance max. 75mm

SA-210 Magnetic detectors

Stud contact with terminals, Size: #248; 10mm, length - magnet 15 mm, relay 23 mm, White design

SA-211 Magnetic detectors

Stud mini contact with cable - EXTRA THIN #216; 9mm, length - magnet 3 mm, relay 14 mm, Working distance max. 19mm, White Design

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.