Jablotron

JA-120PC (90) Bus PIR motion detector with 90° photo-verification camera

Used for motion detection inside buildings, including visual alarm confirmation. Taking a photo is activated by motion, so the cause of the alarm is always indicated in the image. Guaranteed detection coverage 90°/12 m.

Bus PIR motion detector with 90° photo-verification camera

JA-120PC (90) Bus PIR motion detector with 90° photo-verification camera

  • Vision angle of the camera: 90°
  • Resolution of photos: LQ 320*240; HQ 640*480 pixels
  • Flash range: max. 3 metres
  • Power via the control panel bus
  • The detector has impulse activation
  • The detector can be used to control programmable PG outputs
  • The resistance to false alarms is adjustable to two levels
  • The detector is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system

Specifications

Compatible with F-Link 1.5.1 and higher
Power via the control panel bus +12 V (+9 - +15 V)
Backup (idle) mode consumption 5 mA
Current consumption for cable selection 250 mA
Recommended installation height 2.5 m above floor level
Detection angle / detection coverage 90°/12 m
Vision angle of the camera 90°
Flash range max. 3 metres
Resolution of photos LQ 320*240; HQ 640*480 pixels
Size of LQ / HQ photos 2-20 kB / 2-64 kB (typically 6 kB/35 kB)
LQ photo transmission time to the control panel (ideally) within 20 sec. (10 sec.)
HQ photo transmission time to the control panel (ideally) within 130 sec. (60 sec.)
Typical transfer time of a photo to the server 15 s/GPRS; 2 s/LAN or 3G
Dimensions 110 x 60 x 55 mm
Classification security level 2 / environment class II
In accordance with EN 50131-1, EN 50131-2-2
Operating temperature range -10 to +40 °C
Environment General indoor
It also meets the requirements of EN 50130-4, EN 55022

Related products

JA-110P Bus PIR motion detector

The JA-110P is a bus PIR motion detector designed to protect interiors by infrared motion detection in the room . The characteristics of detection can be optimized by using interchangeable lenses.

JA-185P Wireless ceiling PIR detector

The JA-185P is a small-size wireless PIR sensor suitable for protecting small rooms or car interiors. It is designed for wall or ceiling installations.

JA-180W Wireless PIR and MW combined detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

JA-180P Wireless motion PIR detector

The JA-180P motion detector detects the movement of people inside a building . The response to detected motion is either instant or delayed. A built-in tamper contact protects the system from unauthorized tampering.

JA-186P Wireless dual PIR indoor detector

Designed to detect human body movement inside buildings. Detection in two zones gives high detection certainty against moving pets

JA-188P Wireless outdoor PIR detector

The JA-188P provides stable and accurate detection in outdoor environmental conditions. The outdoor motion PIR detector is based on a double-sensor motion detector produced by the company OPTEX.

JA-150P Wireless motion PIR detector

The JA-150P is a PIR motion detector designed for interior protection. It detects object movement having a human body temperature. The detection characteristic may be optimised by using the alternative lenses.

JA-160PC Wireless PIR motion detector combined with a camera

The JA-160PC is wireless component of the JABLOTRON 100 system. It serves for the detection of human movement in building interiors and visual alarm confirmation.