Jablotron

JB-110N Bus PG power output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output power relay. It can be used, for example, to control lighting, fans, etc.

Bus PG power output module

JB-110N Bus PG power output module

The module communicates via a bus and is powered by the control panel bus. It can be installed in a JA-19xPL installation box or a control panel box.

It is not addressable (it does not occupy any position in the security system).

Technical specifications

Power supply via the control panel bus 12 V (9 ...15 V)
Current consumption during backup (open/closed relay) 5 mA/45 mA
Current consumption for cable selection 45 mA
Loading capacity of the relay contacts:
Max. switched voltage 250 V AC/24V DC
Resistive load (cosφ=1) max. 16 A
Inductive, capacitive load (cosφ=0.4) max. 8 A
Minimum switched DC power 0.5 W
Protection class II
Dimensions 70 x 38 x 20 mm
Classification level 2 in acc. with EN 50131-1, EN 50131-3 only when module is located in a JA-194PL or JA-195PL box
using the JA-111H TRB module
Environment according to EN 50131-1 II. indoor, general
Operation temperature range 10 °C to +40 °C
It also meets the requirements of EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581

Related products

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.

JA-110N Bus power output module PG

The JA-110N power output module PG offers a switching relay (16 A) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

JA-110N-DIN Bus DIN power output module

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.

JA-112I Bus section/output PG activation indicator

The JA-112I indicator indicates section security or activation of a PG (1 - 128) output by lighting up a red LED. It is connected to the control and indicating equipment via a bus.

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.

JA-150N Wireless power output module PG

The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).

JA-151N Wireless signal output module PG

The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100+ system (PG 1 to PG 32).

JB-111N Bus signal PG output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output signal relay. For example, it can be used to control an electric door lock, blocking, indication, etc.