Jablotron

JA-112M Bus module for magnetic detectors – 2 inputs

The product is a bus system device for the JABLOTRON 100+ . A bus module used to connect a wide range of magnetic switches to detect when doors and windows are opened. It has two independent inputs with the option of fully setting their properties. 

Bus module for magnetic detectors – 2 inputs

JA-112M Bus module for magnetic detectors – 2 inputs

Up to 100 m of wiring can be connected to each input. Inputs can be connected without balancing, they can be balanced singly or doubly and can be connected to a roller blind switch function. It also allows the inverting of the input or the minimum activation time to trigger the alarm (0.1 s to 300 s) to be set.

The detector communicates with the control panel bus and is powered by it. The detector is addressable and occupies two positions in the security system.

Technical specifications

Power supply via the control panel bus 12 V (9 ...15 V)
Backup (idle) mode current consumption 5 mA
Current consumption for cable selection 10 mA
Maximum cable length from the input to the detector 100 m
Dimensions 110 x 44 x 26 mm
Classification EN 50131-1 ed. 2+A1+A2, EN 50131-3
Environment according to EN 50131-1 II. indoor, general
Operation temperature range -10 °C to +40 °C
It also meets the requirements of EN 50130-4 ed. 2+A2, EN 55032, EN 50581

Related products

JA-150M Wireless magnetic detector with 2 universal inputs

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.

JA-150MB Wireless magnetic detector with 2 universal inputs - brown

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.

JA-151M Mini wireless magnetic detector

The JA-151M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-151MB Mini wireless magnetic detector

The JA-151M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-182M Wireless invisible magnetic detector

The JA-182M is designed for the detection of windows (door) opening. An “invisible” magnetic sensor is installed into plastic or wooden window frames and is therefore totally discreet.

JA-183M Wireless magnetic detector - smaller design

The JA-183M offers a conveniently small size and great door detector features. It is designed to detect doors or windows opening. The door opening detector reacts to the removal of its magnet unit.

JA-183MB Wireless magnetic detector - smaller design

The JA-183MM offers a conveniently small size and great door detector features. It is designed to detect doors or windows opening. The door opening detector reacts to the removal of its magnet unit.

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.