JA-111R Bus interface for JA-100 wireless devices

The JA-111R radio bus module is used to connect all wireless devices of the JABLOTRON 100+ system. To perfectly cover the supervised premises, up to 3 JA-111R modules can be installed in a system. Distributed without plastic cover PLV-JA111R.

Bus interface for JA-100 wireless devices

JA-111R Bus interface for JA-100 wireless devices

The electronic unit is installed in the front part of the cover and it is fitted with a slide-in terminal board, which enables convenient connection of cables. In the rear part, there are break-off holes for cables.

The module communicates with the bus of the control panel and is powered by it. The module is designed for installation outside the control panel and it is used as the second or third one in the system. If you need to have a radio module in the control panel, we recommend you to buy a control panel with a radio module – the JA-10xKR-xx unit.

Technical specifications

Compatible with F-Link 1.4.0 or higher
Power: via the control panel bus 12 V (9…15 V)
Backup (idle) mode consumption 35 mA
Current consumption (maximum) for cable selection 80 mA
Communication frequency 868.1 MHz
Dimensions 43 x 160 x 23 mm
Classification security level 2, ACE type B in accordance with EN 50131-1, EN 50131-3, EN 50131-5-3
Environment II. indoor, general in accordance with EN 50131-1
Operating temperature range -10 °C to +40 °C
It also meets the requirements of ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1
Operation conditions ERC REC 70-03

Related products

JA-150R One-way signal repeater for JA-100 wireless devices

Designed to extend the communication distance and to increase transmission reliability in large installations. It repeats the signal of all one-way devices from JABLOTRON 100+.