JA-110F Bus flood detector

The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.

Bus flood detector

JA-110F Bus flood detector

When water covers the electrodes the detector sends an activation signal, a deactivation signal is sent if the water leaves the electrodes.

It has no tamper facilty and occupies one address in the system.

Technical specifications

Power from control panel digital bus 12 V (9 … 15 V)
Current consumption in standby mode 5 mA
Current consumption for cable selection 5 mA
Detector reacts to flooding by water
Dimensions 53 x 20 x 10 mm
Operational environment according to EN 50131-1 II Indoor general
Operating temperature range -10 °C to +40 °C
Also complies with EN 50130-4, EN 55022