It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
For automation functions, the detection sensitivity can be increased in the triggered system status.
A circular spacer (PLV-P-ST) has been developed as a certified accessory for ceiling mounted detectors so the bus cable can be hidden in cases where it cannot be neatly hidden in the ceiling.
|Power supply||via the control panel bus 12 V (9 ... 15 V)|
|Backup (idle) mode current consumption||2.8 mA|
|Current consumption for cable selection||30 mA|
|Recommended installation height||2.5 - 3.5 m above the floor level|
|Detection angle/detection coverage||360°/11 m (at a 3.5 m installation height)|
|Dimensions||∅125 x 40 mm|
|Classification||EN 50131-1 ed. 2+A1+A2, EN 50131-2-2|
|Environment according to||EN 50131-1 II. indoor, general|
|Operation temperature range||-10 °C to +40 °C|
|It also meets the requirements of||EN 50130-4 ed. 2+A1, EN 55032, EN 50581|