Jablotron

JA-110B Bus acoustic glass-break detector

The JA-110B is a bus glass-break detector which recognizes the sounds of smashing window panes. The detection is based on dual technology (detection of changes in air pressure combined with the sound of breaking glass).

Bus acoustic glass-break detector

JA-110B Bus acoustic glass-break detector

Its sensitivity is adjustable. The detector communicates with and is powered by the bus. The detector is addressable, and occupies one position in an alarm system. SMART MEMORY indication (SMI) provides a visual (LED) verification of detector triggering. SMI is reset via the keypad.

Specifications

Power panel of 12 V bus (9 ... 15 V)
Current consumption in standby (quiescent) 5 mA
Current consumption for choice of cable 5 mA
Recommended installation height 2.5 m above the floor
Detection distance th> up to 9 m
Minimum area for windows 0.6 x 0.6 m
Stabilization time after power up th> max 60 s td> tr>
Dimensions th> 40 x 100 x 22 mm
Classification grade 2 according to EN 50131-1, CLC / TS 50131-2-7-1
Environment according to EN 50131-1 th> II. general indoor
Operating temperature range th> -10 to +40 ° C
Complies EN 50130-4, EN 55022

Related products

SA-200-A Magnetic detector

Magnetic door contact (NC).

SA-201-A Magnetic detector miniature type

Magnetic door contact (NC) - miniature type .

SA-203 Magnetic detectors

Magnetic mini self-adhesive contact with wire, size: 33 x 8 x 9 mm

SA-204 Magnetic detectors

Surface metallic contact for industrial applications and also metallic doors, wires in armoured tube, Size: 49x17x9 mm, Working distance max. 40mm

SA-220 Magnetic detectors

Rolling metal contact also for metallic doors with cable in armoured tube, Size: 106x38x10mm, Working distance max. 75mm

SA-210 Magnetic detectors

Stud contact with terminals, Size: #248; 10mm, length - magnet 15 mm, relay 23 mm, White design

SA-211 Magnetic detectors

Stud mini contact with cable - EXTRA THIN #216; 9mm, length - magnet 3 mm, relay 14 mm, Working distance max. 19mm, White Design

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.