Jablotron

SD-503ST Stand-alone combined smoke and heat detector with built-in siren

The SD-503ST is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises.

Stand-alone combined smoke and heat detector with built-in siren

SD-503ST Stand-alone combined smoke and heat detector with built-in siren

The detector indicates a fire hazard using the built-in LED indicator and acoustic signalling.

The SD-503ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light. It is very sensitive to large dust particles which are present in dense smoke. It is less sensitive to smaller particles generated by the combustion of liquids such as alcohol. That is why the fire detector also contains a built-in heat detector which has a slower reaction but is much better at detecting fire which generates only a small amount of smoke.

Tekniske specifikationer

Power 3 x 1.5 V AA / 2.4 Ah alkaline battery
Please note: Batteries are not included
Typical battery lifetime approx. 3 years
Smoke detection optical light scattering
Smoke detector sensitivity m = 0.11 ÷ 0.13 dB/m pursuant to EN 14604:2005
Heat detection class A1 according to EN 54-5
Alarm temperature + 60 °C to +65 °C
Operating temperature range -10 °C to +65 °C
Dimensions, weight diameter 126 mm, height 52 mm, 150 g
Conformity EN 50130-4, EN 55022

Lignende produkter

BAT-1V5-AA Alkaline battery

Alkaline battery type LR6 (AA) 1.5 V

SD-TESTER Test Spray Smoke Sabre

Smoke Sabre Test Spray is designed to test the functionality of Jablotron’s optical smoke detectors. Contains 150 ml of testing aerosol

ACC-S3.5X40 Træskruer

Velegnet til montering af de fleste alarmenheder.

ACC-D-UX5R UX 5 R universelle plastik-rawlplugs til skruer

Velegnet til montering af de fleste alarmenheder.