Jablotron

EI208W Stand-alone Co detektor

Benyttes til detektering af CO gasser (carbon monoxide) så der advares i tide inden fare for helbredet opstår. Detektoren er godkendt til indendørs installation i bygninger, campingvogne og både.

Stand-alone Co detektor

EI208W Stand-alone Co detektor

Indikerer med lyd og lys ved farlige koncentrationer af carbon monoxid (CO) og for EI208DW modellen ved yderligere visning af koncentrationen på skærmen.

Detektoren forsynes af et integreret litium batteri, der holder enhedens levetid ud.

Tekniske specifikationer

Enhedens levetid 7 år (udløbsdato på mærkat)
Forsyningsspænding integreret ikke udskifteligt litium batteri
Batterilevetid hele enhedens levetid
Temperaturområde –10 °C to 40 °C
Luftfugtighed 15 til 95 % (uden kondensering)
Størrelse 120 × 105 × 40 mm
I overenstemmelse med EN 50291-1, EN 50291-2, EN 50270

Lignende produkter

GS-133 Gas Detector - 12 V DC

The GS-133 detector is used to indicate leaking of explosive gases (natural gas, methan, propane, butane). The detector detects two levels of gas concen-tration - different output reactions.

LD-12 Flood detector

The detector is a water flood indicator for rooms (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission.The LD-12 detector can be connected to the input terminals of alarm systems.

LD-81 Flood detector

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector.

SD-503ST Stand-alone combined smoke and heat detector

The SD-503ST is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises.

SD-283ST Wired combined smoke and heat detector with built in siren

Detector is used to detect fire hazards in the interior of residential or commercial buildings. The detector is also suitable for installing in caravan trailers or mobile homes. The product is not designed to be installed in industrial premises.

EI208DW Stand-alone CO detektor med display

Benyttes til detektering af CO gasser (carbon monoxide) så der advares i tide inden fare for helbredet opstår. Detektoren er godkendt til indendørs installation i bygninger, campingvogne og både.

GS-208-CO Wired module for connection of the Ei208W(D) CO detector

This is a plug-in module designed for direct integration in the Ei208W or Ei208DW stand-alone CO detector that will enable its wired connection to a security or another system.