JS-22 Dual-zone PIR motion wired detector

The JS-22 wired detector is intended to detect human body movement in buildings. Using two sensors ensures better immunity against triggering by moving pets.

Dual-zone PIR motion wired detector

JS-22 Dual-zone PIR motion wired detector

The signal is processed by a multiple signal analysis method which guarantees excellent sensitivity and a high immunity to false alarms. Detection analysis can be adjusted to increase its immunity (if installed in a problematic location). The detector distinguishes itself with excellent immunity against high frequency interference and other unwanted signals. It can be installed on a flat wall or in a corner.

Tekniska specifikationer

Power supply: 12 V DC ± 25%
Standby consumption (LED off): max. 3 mA
Maximum  consumption(LED on): max. 7 mA
Terminal size: 1 mm2
Recommended installation height 1.2 m above floor level
Detection angle/range 120° / 12 m (with basic lens)
Initialisation: max. 60 s
Pulse output length of PIR: 2 s
Alarm output: NC max. 60V / 100mA
Internal resistance max. 30 Ohm
Tamper output: NC max. 60 V / 100mA 
Internal resistance max. 30 Ohm
Environment to EN 50131-1 II. Indoor general
Operational temperature -10 to +40 °C
Dimensions 180 x 60 x 55 mm

EN 50131-1, CLC/TS 50131-2-2,

EN 50131-5-3 classification

grade 2 (medium risk)
Also complies with: ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1

Liknande produkter

JS-20 LARGO - PIR detector

This P.I.R. motion detector is for interior protection. It detects object movement having a human body temperature. The JS-20 distinguishes itself with excellent RF immunity.

JS-25 COMBO - PIR & glass break detector

The JS-25 COMBO is a two-in-one detector. Combines 2 sensors (P.I.R.& glass break) in one housing with excellent RF immunity. It provides three independent outputs (P.I.R. alarm, glass break alarm and tamper).