The module connects to a CAN-BUS data interface in 12V (negative ground) vehicles. Converts digital information for interconnectivity to the inputs of Athos, Akcent and other car alarms.
Used for diagnostics/setting CA-340 Nestor car alarms. Carlink SW makes installation/settings easy, also adding remotes/detectors and checking alarm input statuses and events. The CA-340PRG connects to a PC via a USB port and wirelessly to the alarm.
The GBT-212 is for testing acoustic glass-break detectors. It detects the air pressure changes caused by the flexing or bending of glass and then automatically generates sound imitating the breaking of the glass.
The BL-MCB is a USB programmer for updating software in CAN BUS modules or reading the current software version in a CAN BUS module.
The module is intended for connection to a CAN-BUS data interface in motor vehicles with a 12/24 V voltage and a negative ground connected to chassis.
Alternative grey housing for JA-85P and JA-85B detectors.
Self adhesive antenna, GSM 900 / 1800MHz, 1.5 m cable
Magnetic GPS antenna, FME connector. Can be used with CA-1803BT, CU-08.
Warning sticker - ALARM
All rights reserved © Jablotron 2020